They also have a “live view” feature which allows you to review any alerts or potential threats on your smartphone.
However, despite its great points, it is also subject to failure.
According to the customer support at Blink, the most likely cause for the failure of the Live View system is low battery and low connectivity issues.
So, in this article, we will be discussing these types of failures, as well as some others.
We will also discuss some troubleshooting tips so you can solve the problem with ease and get your Blink camera security system back in working order again.
If this is of interest to you, then read on for more!
What Is Blink?
Blink is a company that is owned by Amazon and was founded in 2014. The company makes domestic home security cameras that are simple to use.
Because they are so easy to use and can connect with a range of phones, these cameras have become very popular over the past few years.
What Are Blink Products?
Including the brand new Blink Video Doorbell, this security camera company offers three cameras with a specific focus on security for your home.
All of these cameras come with 1080p HD video, two-way audio, motion detection alerts, temperature monitoring, and infrared night vision.
Blink cameras can also connect with Amazon’s Alexa, and this will permit you to see video feeds and see any motion detection alerts.
Additionally, all of the cameras can use solar power, be battery operated, and hard-wired.
Battery-powered Blink security cameras will use lithium-ion batteries, which means they can run for up to two years.
Here is a non-exhaustive list of Blink’s security products:
Solar panel mount
Indoor plug-in camera
Indoor wireless camera
Video doorbell
Outdoor wireless camera
Outdoor floodlight camera
Blink Camera: Live View
Every Blink camera has a live view option installed.
This allows you to see a live camera feed from your smartphone or chosen electronic device at any time provided you have the Blink Home Monitor app.
On this app, you will be able to stream video and live sound as you please.
Additionally, every Blink camera permits you to chat with anyone thanks to its “two-way audio” feature.
What Are Some Good Troubleshooting Tips When The Live View Feature Fails?
If your live view feature has failed, then do not worry! There is a way to fix it and get everything back in working order again. Just follow these tips!
LED Indicator
All Blink cameras have LED light indicators that you can use to see if there is a recording issue, and why.
Let’s check out some examples!
When the Blink camera is first switched on, you should see a flashing red light. This is a good indicator that wireless connectivity is being set up.
When new batteries are inserted, you should see a red LED light on the right side of the camera.
Then, when the batteries begin to fail, the blue LED light will go out, and the red LED light will flash around five or six times.
When the Blink security camera senses any motion, then it will flash red very briefly.
If you see a steady blue light, then you will know your camera is recording.
If you see a steady red light, then you will know your camera is having connectivity issues.
If you have a Blink mini-camera and you see a red light, then it means that the camera and the internet are not connected.
Here are some of the common reasons why Live View fails, as well as some tips on troubleshooting and fixing the issues.
Low Battery Power
The batteries of blink cameras can last for up to two years. After this, if you do not change the batteries then they may cause the camera to stop working.
The first thing you need to do is check the batteries. If you notice a red blinking light, you should change them for new ones, and your camera should be in working order again.
Wireless Connectivity Issues
If you have wireless connectivity issues, then your Blink camera will not be able to record or stream audio or video to your smartphone.
This will be indicated by a steady red LED light.
Often, this is an easy fix. If you have issues with the connectivity it usually means that the camera and the wireless hub are too far apart.
So, to fix this problem, you need to change the location of the camera so it can be close to the wireless hub.
However, if your Blink camera’s connectivity issues are recent, then it may be worth resetting it.
Once you have found the reset button, you need to use a paperclip or another small, sharp object to hold down the button for ten seconds.
Keep an eye on the LED light. You should see it change from its current light status to a flashing red. This shows that the camera has successfully been reset.
However, it is important to note that if the red light persists, then you will need to contact customer support.
Resetting The Sync Module
Sometimes, to get the live view to work again, you will need to perform a hard reset of the sync module.
But first, you should try and take the power source out of the camera and leave it for about twenty seconds. Then, you can go ahead and place it back in the camera.
If that doesn’t work, then it’s time for a hard reset of the sync module.
First, you need to locate the reset button.
Once you have done that, hold it down until you see the red light.
Remove your finger from the button. You should see a green and blue flashing light that alternates.
Once this happens, your sync module has successfully been reset and is ready to work again, as long as you pair it with the Blink camera.
Final Thoughts
Sometimes, the live view feature on Blink cameras can fail. However, it has never been easier to get them back in working order again. Just follow our troubleshooting instructions and your camera will be up and running in no time.
Hi, my name is David Jones. My wife and I didn’t have any security protection added to our home, even while we went on holiday abroad. Low and behold - our house was broken into and over $3,000 of belongings were stolen.
Did we have house insurance, you might be asking. No, we did not. So that $3,000 was gone within an instant, and we were left trying to rebuild our once safe space.
I have started Security Camera System Pro to help you find the best information out there on how to get your home protected in the quickest amount of time possible. I hope that I can help you in some way to avoid anyone from going through the same thing that we did.
